Specification | CD-100M | CD-10M |
Measuring range
(at the time of Track) | 0.10～10 N・m | 1.0～100 cN・m |
1.0～100 kgf・cm | 0.10～10 kgf・cm |
1.0～90 lbf・in | 0.10～9 lbf・in |
基本精度 | ±0.5％（F/S）(199 or less digit±1digit) |
显示 | 3.5位数字显示LCD |
双方向 | CW-CCW (right and left) |
测试模式 | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) |
上下限设置 | High and low value are measurement within the limits, and can be set up. |
实时输出 | Load torque value is outputted every about1/ 180 second. |
*大值小值均值 | The maximum, the minimum, average value, and the data number of 30 data are displayed.It saves to ten channels. |
自动复位设定 | Automatically clear the displayed value after certain time
(0.5 - 3.0 sec,selectable at each 0.5 sec).
Setting 0.0 sec for manual Zero clearance |
一键复位 | A clear button is pushed and it is a zero. Data is outputed. |
Data output | ASCII format (baud rate 19200) |
电源 | Ni-Cd chargeable battery 1.2V×5cells 700mAh |
Auto power save | 10 minutes no use, automatically switch off. |
Charging time | About 3 hours |
Continunous working time | About 12 hours |
Socket fit mouth | □ 20mm/ □9.5mm |
Weight | Abbreviation 1 kg |
Outside dimension | 160（W）×125（D）×55（H） |
测试头 | Measurement joint SJ50/SJ10K | Measurement joint SJ10 |
Accessories
(one piece each) | AC/DC adaptor |
Exclusive receipt case |
An inspection report, a proofreading certificate, traceability system figure |
